Wan Link To Wan Link; Broadcast Screen Actions - Zhone IMACS 8000 User Manual

Running Head
Using the Broadcast Option

5.23.1 WAN Link to WAN Link

Circuits from a WAN link to another WAN link can also be duplicated from the broadcast
screen. Use the same procedure to establish multiple connections for WAN-to-WAN circuits.
In Figure 5-62, highlighting the WAN link circuit on slot w1-1 allows you to cross-connect
duplicate information to any other WAN link.

5.23.2 Broadcast Screen Actions

Table 5-12 lists the actions you can perform in the Broadcast Screen. These actions appear on
the bottom highlighted line of that screen.
Action
Bcast
uPdate
dElete
pgUp
pgDn
Main
5-78
Table 5-12. Broadcast Screen Actions
Bcast allows users to program additional broadcast cross-connects in the
system. If mistakes are made during the add process, pressing the up arrow
or down arrow key will terminate this operation.
The uPdate action is initiated by pressing the "p" key. With this command,
users can change any of the parameters of a broadcast connection. Use the
arrow keys to highlight the area to be changed and close the transaction
using the "s" (Save) command.
The dElete action is initiated by pressing the "e" key. Use this command to
delete existing broadcast connections. The system will prompt users to
delete the circuit, and the "y" key must be pressed to complete the
transaction.
The pgUp (Page Up) action is initiated by pressing the "u" key. Since the
system can handle many different circuits, users may fill the screen
allotment for data. New pages will be added automatically to
accommodate additional circuits. The page count feature at the top of the
screen shows users the current page and the total amount of pages of
information. Use this command to scroll up through the pages of
cross-connect information.
The pgDn (Page Down) action is initiated by pressing the "d" key. This
action is similar to the pgUp command. Use this command to scroll down
through the pages of cross-connect information.
Pressing "m" (Main) will return users to the cross-connect screen.
System Configuration and Operation
Function
Model No.
Reference Guide