Wan Actions - Zhone IMACS 8000 User Manual

WAN Card
Action
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., performance and test data).
Xcon Shows the time slot cross-connect map for each WAN port.
Perf Brings up the Performance Data Screen. See the Performance Data section of
this chapter.
Farstat Shows the far-end network register data.
Test Initiates and monitors testing of all WAN card ports. Refer to the Test section
of this chapter.
sWitch Allows you to switch WAN port operations to the redundant (WAN-R) card.
Hdsl Brings up the HDSL Screen described later in this chapter. This command is
shown only for a WAN-U card.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or abandon your changes.
System Cards
WAN Card User Screens and Settings
Table 9-6. WAN actions
Function
9-31