Zhone IMACS 8000 User Manual page 377

E&M Card
LB DET
The user can either enable or disable the loopback detection. The options available are w/to,
on and off. The w/to option indicates the loopback detection is ON and 20 minute timeout is
enabled. The on option indicates the loopback detection is ON and timeout is disabled. The
off option is used for loopback detection is disabled. The default setting is w/to.
LB STAT
This is information only - no user input is allowed. This tells the user if a particular port is in
loopback state or not.
Voice Cards
E&M Card User Screens and Settings
11-17