Test Screen Actions; Test Screen Option Settings And Defaults - Zhone IMACS 8000 User Manual

Running Head
E&M Card User Screens and Settings
Action
Save
Undo
Refresh
Copy
Main
Table 11-6 summarizes the available test parameters and option settings. The following
paragraphs also describe these parameters and settings in detail.
Table 11-6. Test Screen Option Settings and Defaults
Parameter
TEST
Tx ABCD
Rx ABCD
E-lead
TO USER
TO NTWK
Tx ABCD
Rx ABCD
E-lead
M-lead
MODE
STATUS
SIG MON
The Signaling Monitor feature works with the user card alarm system to detect excessive
signaling bit transitions. The system will generate alarms if the number of transitions of any
signaling bit in transmit or receive direction for an active port exceeds 255 in any four second
interval. The options are off and on, and they are toggled by pressing "g".
TEST
The Test parameter shows if the port is in test mode or not. Inactive ports and ports that are
assigned to inactive WANs will show a test status of n/a. The test status options for active
ports are off and on.
11-12
Table 11-5. Test Screen Actions
Saves changes to settings.
Returns all settings to the last saved state.
Updates certain time-related information fields that are not automatically
updated (i.e., test status).
Copies the settings of one port to another port that requires the same
settings.
Returns to the E&M Card Main Screen. If changes are made to settings
and not saved, you will be prompted to save or lose changes.
User Options
off on
mon set
mon set
mon set
PCM 300Hz 1kHz
PCM 300Hz 1kHz
Status information only; not user-editable
Status information only; not user-editable
Status information only; not user-editable
Status information only; not user-editable
Status information only; not user-editable
Status information only; not user-editable
Function
3kHz quiet
3kHz quiet
Model No.
E&M Card
Default
off
mon
mon
mon
PCM
PCM
n/a
n/a
n/a
n/a
n/a
n/a
Voice Cards