Time Slot Cross-Connection Options And Defaults - Zhone IMACS 8000 User Manual

System Configuration and Operation
Table 5-9. Time Slot Cross-Connection Options and Defaults
Parameter
CIRCUIT ID Any combination of letters or numbers up to 14 characters, including
spaces
W/U w1-1
TS/BW table
TEST off
3KHz
W/U w1-1
TS/BW table
TEST off
3KHz
TYPE v
TC
v n/a
v&s e&m fxsl
user*(this selection will require a user-defined bit pattern) mrd
d n/a
CNV
PCM none
CONV
SIG none
CONV ABCD-AB01
CIRCUIT ID
A circuit is defined as a group of one or more DS0 time slots cross-connected from one WAN
link to another. Each circuit can carry either voice or data traffic, and needs its own name to
facilitate cross-connect management within the system. The Circuit ID field allows you to
name individual pass-through circuits. The factory-default ID is "new circuit." However, you
can change the ID to show any relevant title for the pass-through connection, although each
circuit ID must be unique. This ID can contain up to 14 numbers, letters (uppercase and
lowercase), and spaces, in any combination. Figure 5-42 shows an example of a new circuit,
which is named SF01-NY01.
Reference Guide
User Options
w1-2 w2-1 w2-2
all0 all 1 m_oos
w1-2 w2-1 w2-2
all0 all 1 m_oos
v&s d
fxsg fxsd plar
A-mu mu-A
ANSI-CCITT CCITT-ANSI
Cross-Connecting WAN Time Slots
w3-1 w3-2 w4-1
1:1 1:7 lpbk 300Hz
w3-1 w3-2 w4-1
1:1 1:7 lpbk 300Hz
dpo fxol fxog
ABCD-ABAB
Default
**************
w4-2 w1-1
00
1KHz off
w4-2 w1-1
00
1KHz off
d
no
fxod dpt e&m
n/a
none
none
5-55