Display And Change Circuit Names; Cross Connect Screen - Zhone IMACS 8000 User Manual

System Configuration and Operation
Note: Not all circuits formed in the IMACS system have a direct relationship with a slot and
unit. These types of circuits are not maintained by the CNA. Circuits made manually
from the Cross Connect screen are not be affected by other resources. Examples of this
type of circuit are WAN-to-WAN, broadcast, and Tads circuits.

5.17.1 Display and Change Circuit Names

Circuits can be displayed on the Cross Connect screen by pressing the "x" key from the main
screen as shown below.
Circuits are then selected by moving the arrow keys up and down. Only network type circuits
are shown on the first Cross Connect screen.
To display a list of all cross connects in the IMACS system from the Cross Connect screen,
select "View All". Below is a sample of this screen.
Reference Guide
Figure 5-24.Cross Connect Screen
Circuit Names
5-43