Active Amt Main Screen - Zhone IMACS 8000 User Manual

Running Head
System Redundancy
An AMT MAP can also be created on a remote node and loaded via the rEstore function. See
the AMT help for remote operation.
SWITCHING SETUP PROCEDURE:
Note: This version of the AMT set up process is service effecting.
1. From the AMT MGMT menu screen select Copy. This function copies the active
cross-connect mapping table and stores it in the reserved alternative mapping table storage
area.
2. From "AMT MGMT" menu screen select sWitch. This function switches from the active
connections to the ALT MAP connections, and activates the AMT ACT alarm. At this
point the active and AMT map cross-connections are identical, so a momentary service
disruption may occur.
3. The alarm banner will now display the AMT ACT alarm. This confirms that the AMT
feature is now active, and the system is running from the alternative map. Now the user
can make changes to the configuration settings of the User, Server, WAN, CPU and IF slot
menu screens. Please note that changes at this time are actively written to the shelf
changing the running configuration, as well as to the Alternative Map to be activated in
case of emergency.
5-114
System Configuration and Operation
Figure 5-95.Active AMT main screen
Model No.
Reference Guide