System Configuration and Operation
4. Select the type of voice card from the types listed above the bottom line of the screen, as
shown in Figure 5-36. In that screen, fxs-6 is chosen as the card type (FXS, 600 ohms).
5. Select the WAN port to which you want to assign the voice cards (W1-1 or W1-2), as
shown in Figure 5-37. We are choosing w1-2 to assign the cards automatically.
Reference Guide
Figure 5-36.Typical Card Slot and Type Selection
Figure 5-37.Typical WAN Card Selection
Automatic Time Slot Assignment
5-51