Table of Contents
Advertisement
Displaying Configuration Options
To display configuration options, you must first load a configuration into the edit area. To load a
configuration option set into the configuration edit area, follow this menu selection sequence:
Main Menu → Configuration (Load Configuration From)
Make a selection by placing the cursor at your choice and pressing Enter.
If you select . . .
Current
Configuration
Configuration Loader
Default Factory
Configuration
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current or default configuration is
loaded. To access the Configuration Edit/Display screen, follow this menu selection sequence:
Main Menu → Configuration → Current Configuration
– or –
Main Menu → Configuration → Default Factory Configuration
main/config/edit
-----------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
7990-A2-ZN10-30
Then . . .
The selected configuration option set is loaded and the Configuration
Edit/Display menu screen appears.
The Configuration Loader screen is displayed allowing you to upload
or download configurations from a TFTP server.
The selected configuration option set is loaded and the Configuration
Edit/Display menu screen appears.
CONFIGURATION EDIT/DISPLAY
DSL Port
DSL Port Threshold Traps
SYNC Port | G.703
System Options
Communication Port
Management and Communication
Hotwire TDM SHDSL Endpoints
Model:799x
MainMenu
Exit
11
Advertisement
Table of Contents
