Zhone IMACS 8000 User Manual page 783

connectors and pinouts C-30
description 11-1, C-30
error messages 11-16
installation 11-2
jumper settings 11-2
testing 11-11
troubleshooting 11-16
FXS card
configuration 10-3
connectors and pinouts C-29
description 10-1, C-29
installation 10-3
testing 10-13
troubleshooting 10-18
I
ICMP parameters
destination unreachable 5-35
display, typical 5-33
echo replies received 5-35
echo replies sent 5-35
echo requests received 5-35
echo requests sent 5-35
messages sent 5-35
Incoming circuit configuration
CGA trunk conditioning 17-7
compression rate 17-6
PCM coding 17-6
signaling mode 17-6
user card and port 17-5
voice/signaling type 17-6
WAN link 17-5
WAN time slot 17-5
Installation
CSU modules 7-18
DSX/CEPT modules 7-14
redundant card chassis slot 7-18
WAN cards 7-18
Installing the ADPCM card 17-2
Installing the CPU card 5-3
Installing the E&M card
E&M 4W*8 (S 60) card 9-4, 18-2, C-27
E&M 4W*8 ER (S 60) card 9-4
Installing the FXO card 11-2
Installing the FXS card
FXS 2W*8-6 (S 60) card 10-3
Installing the OCU-DP card 15-2
IP packet routing setup