Analog Bridge Port Screen Option Settings And Defaults - Zhone IMACS 8000 User Manual

Analog Bridging Server Card Analog Bridge Server Card User Screens and
Settings
Refresh
Copy
Bridges
Names
<
>
Main
Table 20-4 summarizes the configuration settings for the Analog Bridge Server Card, along
with the available and factory-default option settings. The parameters and settings are also
described in the following paragraphs.
Table 20-4. Analog Bridge Port Screen Option Settings and Defaults
Parameter
STATE
BRIDGE
USER
WAN
TS/PORT
SIG MODE
CODING
SUB CHAN
RX MODE
TX MODE
ECHO CAN
GAIN
logUNIT
STATE
This field displays the currently set port state, either active or standby
BRIDGE
This field is a display-only field that shows the bridge number the port is assigned to. At this
level, all the bridges will display the same number.
Server Cards
Refresh - Updates certain time-related information fields that are not
automatically updated (i.e., test status). Refresh will also compact and
reorder all the ports in the LogUNIT sequence.
Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Selecting bridges goes back to the main bridge screen.
This field (introduced in 7.1.2) allows the user to name the bridge
participant with a fourteen character strings.
View the previous eight bridges
View the next eight bridges
returns to the Systems Main Screen. If changes are made to settings and not
saved, you will be prompted to either save or lose your changes.
User Options
stdby actv
Display only
none U1 U2 U3
none w1-1 w1-2 w2-1 w2-2 w3-1 w3-2
w4-1 w4-2
01 through 32
none e&m to
u-law a-law adpcm g729b modem
1 through 5
hdplx fdplx
na
disab enabl
-15.0 through 7.5
Display Only
U4 U5 U6 U7
Default
stdby
01
U8 none
none
n/a
none
n/a
n/a
hdplx
na
disab
0.0
xx
20-7