Running Head
IPR*4PPP Configuration Screens and Settings
9. Go to the porT screen, and assign the WAN connections to the remote systems. The IP
address that exists at the far-end of the PPP link will be automatically discovered through
IPCP messaging. You will need to enter a name on the porT screen to help locate the
appropriate link later using the Find command functions.
10. Turn-up the porT, and the status should change to UP if all provisioning and WAN links
are in the appropriate state and provisioned correctly.
21.10.3 IPR*4 INTF NAME screen
The INTF NAME screen is where associations are defined between an IP address and the
ethernet jacks on the front of the card. This interface should not be used to define the PPP
links; this association will be added on the porT screen itself. The INTF NAME screen is
shown in Figure 21-16
.
21-26
Figure 21-16.INTF Name Screen
Model No.
IPR*4 Router Card
Server Cards