Main Screen Actions; Main Screen Option Settings And Defaults - Zhone IMACS 8000 User Manual

DS0-DP Card
Action
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Redraws the Main Screen.
Copy Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
Table 18-2. Main Screen Option Settings and Defaults
Parameter
STATE stdby
WAN/SRV none wan
TS n/a 01-24 01-31
MODE ds0dp
CLK int
LB off
LB GEN off
LB DET off
STATE
The State setting determines whether the port is active or inactive. An inactive port does not
occupy a time slot on a WAN link. Set the state setting to stdby (standby) for ports that are not
to be used or are not yet configured. Set it to actv (active) for ports that are ready for use.
WAN/SRV
The WAN/SRV setting identifies the card to which the output of this port is directed. If wan
is chosen, the data from this port will be directed to a WAN port (the options are w1-1 to
w4-2). You then need to select a time slot.
The WAN setting identifies the WAN link assigned to this port. It is not necessary for all ports
on the same card to be assigned to the same WAN link, or to contiguous time slots on a WAN
link. Ports can be split between WAN and Server card links.
Data Cards
DS0-DP Card User Screens and Settings
Table 18-1. Main Screen Actions
User Options
actv
contr codir
ext n/a
dte net
ocu dsu csu ds0
enab w/to
Function
Default
stdby
none
n/a
ds0dp
int
off
off
off
18-3