Test, Debug, Backup & Restore; Zipping The System; System Test And Debug Screen; Zip Screen - Zhone IMACS 8000 User Manual

System Configuration and Operation
5.12.1 Test, Debug, Backup & Restore
Advanced configuration and diagnostics are available through the use of the sYs (sYstem)
command from the System Main Screen. Pressing "y" brings up the Test and Debug screen
shown in Figure 5-19.

5.12.2 Zipping the System

Figure 5-20 shows a typical Zip Screen, which appears when you press "z" in the Test and
Debug Screen.
The "Z" (Zip) command allows a user logged in under the Operator or higher password level to
reprogram the entire system. Because the options for all cards in the system will revert back to their
original factory settings, be sure to carefully consider the consequences of "zipping" your system
before doing so.
Reference Guide
Figure 5-19.System Test and Debug Screen
CAUTION!
Figure 5-20.Zip Screen
System Level Maintenance
5-31