Switching To A Redundant Cross-Connect Wan Card - Zhone IMACS 8000 User Manual

Running Head
WAN Card Redundancy
Figure 5-79
To force a switch, press "w" (sWitch command), then press "y" to complete the switch. The
traffic on the WAN card in slot W1 will be switched to the WAN-R card in slot W4. The Main
System Screen (see Figure 5-79) now shows both ports of the card in slot W4 as active port
(Status = aa) and the ports on the card in slot W1 as redundant (Status = rr).
Figure 5-79.Switching to a Redundant Cross-Connect WAN Card
In addition to the status of the WAN card changing, the IMACS shelf will also raise the
WAN-rr alarm to indicate that a protection switch is currently active.
5-98
shows a WAN Card Main Screen for the card in slot W1 with port 1-1 selected.
8
System Configuration and Operation
Model No.
Reference Guide