Main Screen Actions; Main Screen Option Settings And Defaults - Zhone IMACS 8000 User Manual

Running Head
OCU-DP Card User Screens and Settings
Action
Save
Undo
Refresh
Perf
Test
Main
Table 17-2. Main Screen Option Settings and Defaults
Parameter
STATE stdby
WAN/SRVsrv wan (w1-1 through w4-2) serv (P1 through P3)
TS 01-24
FRAME a
RATE 2.4
SR TS 01
MODE ocu
ERR COR off
SECOND n/a
USER LB d
LB off
LB GEN off
LB DET w/to
Notes:
1. When the WAN/SRV option is set to P1, P2, or P3 (Server cards), the only valid options
for RATE are 56K and 64K.
2. The maj-v option is supported on all cards if the Rate is 2.4, 4.8 or 9.6. Error Correction
is not supported if the Rate is sw56k. BCH Error Correction is not supported on the
5-port and 10-port OCU-DP card. The BCH algorithm is supported only at 19.2, 56,
and 64 kbps.
STATE
The State setting determines whether the port is active or inactive. An inactive port does not
occupy a time slot on a WAN link. Set the state setting to stdby (standby) for ports that are not
to be used or that are not yet configured. Set it to actv (active) for ports that are ready for use.
17-4
Table 17-1. Main Screen Actions
Saves changes to settings.
Returns all settings to the last saved state.
Updates certain time-related information fields that are not automatically
updated (i.e., performance and test data).
Brings up the Performance Data Screen.
Initiates and monitors testing of all OCU-DP card ports. Refer to Test
section of this chapter.
Returns to the System Main Screen. If changes are made to settings and
not saved, you will be prompted to save or lose changes.
User Options
actv
01-31
b-5 b-10 b-20
4.8 9.6 19.2 56k
01-05 01-10 01-20
csu
maj-v bch
off on
o
dte net-d net-a
ds0-n ocu-n csu-n
on off
Function
64k sw56k
csu-u
Model No.
OCU-DP Card
Notes Default
stdby
w1-1
01
a
1 2.4
01
ocu
21 off
off
d
off
off
w/to
Data Cards