Default Group Permissions - Zhone IMACS 8000 User Manual

System Configuration and Operation
When the system is first commissioned, or after a ZIP function, the user group defaults to the
following configuration:
1 RW
2 - 32 R
User group 1 is the "Superuser" and its attributes are not provisionable. User groups 2 to 32
default to R in all attributes. They can have any one of 3 possible values entered into the
various cells of the user group table:
N = None. When "N" is entered in a section of the user group definition, users with that
group have no access to that part of the system, including its UI
R = Read Only. When "R" is entered in a section of the user group definition, users with
that group have read (or view) access to that part of the system, including its UI. However,
they can not make any changes or edits.
RW = Read/Write access (full access). When "RW" is entered in a section of the user
group definition, users with that group have read, write, and edit access to that part of the
system, including its UI
WARNING!It should be noted that users with the ability to
Administer Users will be able create new accounts with read/write
access to ALL categories. Care should be exercised in providing
access to the Administer Users function.
To change a password, first log into the system under a user who has the RW capability
assigned to Administer Users, or the admin level. Enter the CPU level, as shown in Figure
5-8. Enter N for userNames, and a screen such as Figure 5-9 appears.
Reference Guide
Table 5-4. Default Group Permissions
RW RW RW
R R R
System Initialization
RW RW RW
R R R
RW
R
5-9