Tftp Protocol Bin Download - Zhone IMACS 8000 User Manual

Running Head
Upgrades
of the PC or server from which you are downloading the firmware. You may need to
change the routing table on your PC to include the MCC ethernet address as the gateway,
or the local host address as the gateway for the system receiving the file as the destination
IP address.
3. The third option is to connect to the Integrated Access System interface card's COM (C1)
port to which you will download the firmware using PPP or SLIP protocol at 19.2k or 9.6k
respectively. Again, you may need to change the routing table on your PC and/or on the
router or terminal server through which the PPP/SLIP connection runs.
Note: Your PC must have some sort of TFTP server software installed and running when you
are downloading the binary files to the system. Consult the user guide accompanying
the TFTP software for details on configuring and using the software.
7.7.3.2

TFTP Protocol Bin Download

Follow the steps listed below to perform a TFTP protocol bin download.
1. Establish connection in one of the following methods:
• Telnet directly to the CPU ethernet port
• Telnet connection to the Integrated Access System, using the SLIP/PPP connection
via the computer port (COM1) connected through a terminal server or router.
• Telnet connection through the MCC card, via HDLC or B7R / B4R.
2. Log into the Integrated Access System using an administrator password.
3. Highlight the appropriate CPU with the cursor and press "P".
4. The binary buffer area appears, and one of the buffers will display an active state. The
other buffer may be empty or may have a file in it. The lower portion of this screen shows
the current kernel version, an should indicate 7.0.0 with a checksum of 0x12A754.
7-54
Model No.
CPU Card
System Cards