Running Head
IPR*4 Card Configuration Screens and Settings
21.4.2 IMACS Management Through the IPR*4 Card
Figure 21-4.Setting the CPU management through the IPR*4 card
The system can be configured in such a way as to allow the IMACS management port to come
over the PPP link. Figure 21-4 shows the setup to manage this IMACS node through the IPR*4
card. The default IP port noted in the figure is pointed to the IPR*4 server card, which in this
example resides in slot P2. Please note that when managing the IMACS through the IPR*4
card, a change to the IMACS host CPU IP address may require that the IPR*4 card be restarted
(placed OOS) in order for the new IMACS IP address to be accessible.
21.4.3 IPR*4 10/100BT (ROUTER-PPP-HS) Card Main Screen
The main screen of the IPR*4 screen gives the operator the current interface setup of the card
by displaying the current routing table for the card.This main screen in shown in Figure 21-5.
21-6
Model No.
IPR*4 Router Card
Server Cards