OC3 Card
- as long as the electrical facility does not exist. The OC3 uplink card allows for not only the
optical facilities to route, but the customer can continue to use their electrical facilities. As
seen in Figure 23-9, WAN port 2-1 is in the process of being set to Group 3 and Vt 2.
GROUP
When a WAN appearance has been set to standby from ignore, the system will require that a
Group and VT be assigned to that port. Available groups are from 1 to 7.
VT
When a WAN appearance has been set to standby from ignore, the system will require that a
Group and VT be assigned to that port. Available VTs are from 1 to 4.
Server Cards
Figure 23-9.STATE and TRIB provisioning
OC3 Card User Screens and Settings
23-11