Rs232 (Term) Local Interface Jack; Rs232 (Term) Jack Signal Pinouts - Zhone IMACS 8000 User Manual

Using the Control Terminal Port
The RS-232 Control Terminal Port allows you to connect the Integrated Access System to a
local VT100-compatible terminal, which you can then use to control the system. This port is
configured as a DCE interface.
Connect your local terminal to the TERM jack of the INF-E card. This is an RJ-45 jack in
compliance with EIA-561. Figure C-13 shows the pin locations on this jack, and Table C-10
lists the signal pinouts.
RS232 Pin
4
5
6
All other pins are open.
Pin Outs
Figure C-13.RS232 (TERM) Local Interface Jack
Table C-10. RS232 (TERM) Jack Signal Pinouts
Function
Signal Ground
Receive Data
Transmit Data
Pin 1
Pin 8
Direction 9-pin connector
N/A
To local terminal
To access system
5
3
2
C-15