Capability; Dsl Advanced Settings - Zhone 6519-X1 User Manual

•
G.dmt Enabled
•
G.lite Enabled
•
T1.413 Enabled
•
ADSL Enabled
•
Annex L Enabled
•
ADSL2+ Enabled
•
AnnexM Enabled
Do not change this setting unless so directed by your ISP.

Capability

The following are included under Capability:
•
Bitswap Enable
•
SRA (Seamless Rate Adaptation) Enable
Do not change these settings unless so directed by your ISP.

DSL Advanced Settings

Do not change the DSL Advanced Settings unless so directed by your ISP.
To view the DSL Advanced Settings screen, click Advanced Settings button on the DSL
Settings screen.
The test mode can be selected from the DSL Advanced Settings page. There are five test modes
between the router and your ISP:
•
Normal test: Puts the router in a test mode in which it only sends a Normal signal.
•
Reverb test: Puts the router in a test mode in which it only sends a Reverb signal.
•
Medley test: Puts the router in a test mode in which it only sends a Medley signal.
•
No Retrain: In this mode the router will try to establish a connection as in normal mode, but
once the connection is up it will not retrain if the signal is lost.
•
L3: Puts the router into the L3 power state.
To run a test:
1. Select a test mode and click Apply.
65xx-A1 Family Router Users Guide
75