Dsl Advanced Settings - Zhone 6211-I3 User Manual

Advanced Setup

DSL Advanced Settings

74
6211-I3 ADSL2+ Router User's Guide
Bitswap Enable
!
SRA (Seamless Rate Adaptation) Enable
!
Do not change these settings unless so directed by your ISP.
Do not change the DSL Advanced Settings unless so directed by your ISP. To
view the DSL Advanced Settings screen, click on the Advanced Settings
button on the DSL Settings screen (see
There are five test modes between the router and your ISP:
Normal test: Puts the router in a test mode in which it only sends a
!
Normal signal.
Reverb test: Puts the router in a test mode in which it only sends a Reverb
!
signal.
Medley test: Puts the router in a test mode in which it only sends a
!
Medley signal.
No Retrain: In this mode the router will try to establish a connection as in
!
normal mode, but once the connection is up it will not retrain if the signal
is lost.
L3: Puts the router into the L3 power state.
!
Figure 65: DSL Advanced Settings
Figure 64).