Connecting The Connectors - Mitsubishi Electric MELSEC iQ-F Series FX5 User Manual

Array the flat cables in the order described below.
A1→B1→A2⋅⋅⋅⋅⋅⋅
(The diagram below shows the view from the connector insertion aperture)
B20 B19 B18 B17 B16 B15 B14 B13 B12 B11 B10 B09 B08 B07 B06 B05 B04 B03 B02 B01
A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A09 A08 A07 A06 A05 A04 A03 A02 A01

Connecting the connectors

Mounting order
(1)
(1)
Removal method
When removing, loosen the connector mounting screws 2, and pull out the connector horizontal to the module.
1.
Connect the wired connector to the module insertion
aperture.
2.
Tighten the connector mounting screws 2 (M2.6
screws) (1).
6 WIRING
47
6.2 Connector Wiring
6