14.3
Module Extension Parameter
Set the module extension parameter. The module extension parameter has positioning data and block start data number 0 to
4 for each axis.
Select the module extension parameter from the tree on the following window.
[Navigation] [Parameter] [Module Information] [Target module] [Module Extended Parameter]
Positioning data
Set the positioning data for each axis.
Item
Operation pattern
14 PARAMETER SETTING
320
14.3 Module Extension Parameter
Setting range
• 0: Positioning complete
• 1: Continuous positioning control
• 3: Continuous path control
Reference
Page 411 [Da.1] Operation pattern