Mitsubishi Electric MELSEC iQ-F Series FX5 User Manual page 325

Automatic Command Speed Calculation
The automatic command speed calculation calculates the command speed from various conditions.
■Setting method
The automatic command speed calculation can be used for positioning data with the following control
methods or without any control method.
• 01H: ABS1 1-axis linear control (ABS)
• 02H: INC1 1-axis linear control (INC)
• 03H: FEED1 1-axis fixed-feed control
1.
Double-click on "Automatic Command Speed
Calculation" for the "Axis  Positioning Data".
2.
Set "Positioning Data No." to the positioning data
number for which you want to calculate the command
speed.
3.
Configure the distance of movement, operation time,
acceleration time, and deceleration time and then click
[Calculate Command Speed] to display the calculation
in the "Calculation Result" section. Click [OK] to update
the positioning data with the calculated command
speed.
4.
Once the calculation result is displayed, click [Simulate
Calculation Result] to display the waveform based on
the calculation result.
14.3 Module Extension Parameter
14 PARAMETER SETTING
14
323