Mitsubishi Electric MELSEC iQ-F Series FX5 User Manual page 441

[Md.55] Date of write accesses to flash ROM (minute/second)
This area stores the latest date (minute/second) when the data is written to flash ROM with the BCD code. Monitor the value
in hexadecimal format.
Buffer memory configuration
b15 b14 b13 b12 b11 b10 b9
(1) (2)
■Buffer memory address
The following table shows the buffer memory address of this area.
Buffer memory name
[Md.55] Date of write accesses to flash ROM (minute/second)
[Md.56] Date of write accesses to flash ROM (ms)
This area stores the latest date (ms) when the data is written to flash ROM with the BCD code. Monitor the value in
hexadecimal format.
Buffer memory configuration
b15 b14 b13 b12 b11 b10 b9
(1) (2)
■Buffer memory address
The following table shows the buffer memory address of this area.
Buffer memory name
[Md.56] Date of write accesses to flash ROM (ms)
[Md.59] Module information
The module-specific code is stored with the BCD code. Monitor the value in hexadecimal format. (Positioning module: 63E2H
is stored)
The refresh cycle is each time the power is turned on.
Buffer memory configuration
b15 b14 b13 b12 b11 b10 b9
(1) (2)
■Buffer memory address
The following table shows the buffer memory address of this area.
Buffer memory name
[Md.59] Module information
b8 b7 b6 b5 b4 b3 b2
(3) (4)
b8 b7 b6 b5 b4 b3 b2
(3) (4)
b8 b7 b6 b5 b4 b3 b2
(3) (4)
Stored contents
(1) Minute (tens place)
b1 b0
(2) Minute (ones place)
(3) Second (tens place)
(4) Second (ones place)
Common for axes 1 and 2
1490
Stored contents
(1) Use prohibited
b1 b0
(2) ms (hundreds place)
(3) ms (tens place)
(4) ms (ones place)
Common for axes 1 and 2
1491
Stored contents
(1) Fourth digit
b1 b0
(2) Third digit
(3) Second digit
(4) First digit
Common for axes 1 and 2
31332
17 DATA USED FOR POSITIONING CONTROL
17
Stored value
0 to 5
0 to 9
0 to 5
0 to 9
Stored value
Fixed to 0
0 to 9
0 to 9
0 to 9
Stored value
0 to F
0 to F
0 to F
0 to F
439
17.7 Monitor Data