Huawei NetEngine80E Configuration Manual - Reliability page 1147

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Issue 02 (2014-09-30)
ip address 3.3.3.3
255.255.255.255
#
interface
Tunnel1/0/1
ip address unnumbered interface
LoopBack0
tunnel-protocol mpls
te
destination
1.1.1.1
mpls te signal-protocol cr-
static
mpls te tunnel-id
200
mpls te passive-
tunnel
mpls te binding bidirectional static-cr-lsp egress
tunnel1/0/1
mpls te reserved-for-
binding
mpls te
commit
#
interface
Tunnel1/0/2
ip address unnumbered interface
LoopBack0
tunnel-protocol mpls
te
destination
2.2.2.2
mpls te signal-protocol cr-
static
mpls te tunnel-id
300
mpls te passive-
tunnel
mpls te binding bidirectional static-cr-lsp egress
tunnel1/0/2
mpls te reserved-for-
binding
mpls te
commit
#
ospf
1
area
0.0.0.0
network 3.3.3.3
0.0.0.0
network 10.1.3.0
0.0.0.255
network 10.1.4.0
0.0.0.255
#
static-cr-lsp egress 1to2 incoming-interface GigabitEthernet1/0/1 in-label
20
#
tunnel-policy
policy1
tunnel binding destination 1.1.1.1 te
Tunnel1/0/1
tunnel binding destination 2.2.2.2 te
Tunnel1/0/2
#
mpls-tp meg
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Bit-Error-Triggered Protection Switching Configuration
1130