NEC UNIVERGE SV8100 Features & Specifications Manual page 1034

Issue 5.0
Program
Number
14-06-01
14-07-01
15-06-01
1 - 1024
Program Name
Trunk Group Routing – Priority
Order Number
Trunk Access Map Setup – Trunk
Port Number
Trunk Access Map for
Extensions
Description/Comments
Used to set the priority order
number 1~4.
Assign trunks to Access Maps.
Assign Access Maps to
extensions.
UNIVERGE SV8100
Assigned Data
0 = Not Specify1~100 :
(Trunk Group
Number)1001~1100 :
(1000 + Route Table
Number)
Default:
Route 1, Order
Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified).
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
Trunk Access Maps:
1~200
Trunks 1~200
(default = 1)
Trunk Groups