NEC UNIVERGE SV8100 Features & Specifications Manual page 1029

UNIVERGE SV8100
Program
Number
21-15-01
23-03-01
25-10-01
25-12-01
34-03-01
Trunk Group Routing
Program Name
Individual Trunk Group Routing
for Extensions
Universal Answer/Auto Answer
Trunk Group Routing for DISA
Alternate Trunk Group Routing
for DISA
Trunk Group Routing for E&M
Tie Lines
Description/Comments
Designate the trunk route
accessed when a user dials the
Alternate Trunk Route Access
Code assigned in Program
11-09-02. Trunk Group Routing is
set up in Program 14-06.
Use this program to let an
extension user automatically
answer trunk calls that ring other
extensions. When the user lifts the
handset, they automatically
answer the ringing calls based on
Trunk Group Routing
programming (defined in Program
14-06).
Assign the Trunk Group Route
chosen when a user places a
DISA call into the system and dials
9. The Trunk Group Routing is
defined in Program 14-06. If the
system has ARS, dialing 9
accesses ARS. The route chosen
is based on the DISA Class of
Service, which is determined by
the password the caller dials.
Define the trunk route selected
when a DISA caller dials the
Alternate Trunk Access Code
assigned in Program 11-09-02.
The route selected is based on the
DISA caller's Class of Service,
which is in turn determined by the
password the caller dials. Program
14-06 is used to set up the Trunk
Group Routing.
Use this program to assign the
Trunk Group Route chosen when
a user seizes a Tie Line and dials
9. Set Trunk Group Routing in
Program 14-06. If the system has
ARS, dialing 9 accesses ARS.
Issue 5.0
Assigned Data
Trunk Group Routes:
1~100
0~100
(0 = No Setting)
(default = 0)
Maximum eight digits
Day/Night Mode
1~8
Route Table Number
0~100
(default = 0)
Trunk Group Routes:
1~100
Day/Night Mode = 1~8
Route Table Number =
0~100
(0 = No Setting)
(default = 1)
Trunk Group Routes:
1~100
Day/Night Mode = 1~8
Route Table Number =
0~100
(0 = No Setting)
(default = 1)
Trunk Group Routes:
1~100
0~100
(0 = Setting)
(default = 1)
1 - 1019