UNIVERGE SV8100
Guide to Feature Programming
Program
Number
10-09-01
10-55-01
10-55-03
UNIVERGE Multimedia Conference Bridge
Program Name
DTMF and Dial Tone Circuit
Setup
Package Network Setup – IP
Address
Package Network Setup – Main/
Add-on
Description/Comments
Assign at least one circuit for
DTMF reception (type 0 or 1). Use
the following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one
DTMF receiver for every 10
devices that use them.
In heavy traffic sites, allocate
one DTMF receiver for every
five devices that use them.
Use to define the IP Address for
the CD-ETIA.
The Main setting is to be utilized to
distribute an IP Address to the
blade.
Issue 5.0
Assigned Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255255.254
192.0.0.1 ~
223.255.255.254
(default =
172.16.1.100)
0 = Main
1 = Add-on
(default = 1)
1 - 1061