NEC UNIVERGE SV8100 Features & Specifications Manual page 1019

UNIVERGE SV8100
Program
Number
24-02-02
24-02-03
24-02-04
24-02-05
Transfer
Program Name
System Options for Transfer –
MOH or Ringback on Transferred
Calls
System Options for Transfer –
Delayed Call Forwarding Time
System Options for Transfer –
Transfer Recall Time
System Options for Transfer –
Message Wait Ring Interval Time
Description/Comments
Use these options to enable (0) or
disable (1) MOH on Transfer. If
enabled (0), a transferred caller
hears Music on Hold while their
call rings the destination
extension. If disabled (1), a
transferred caller hears ringback
while their call rings the
destination extension. For this
option to work with voice mail, the
transferred call must be an
unscreened transfer.
If activated at an extension,
Delayed Call Forwarding occurs
after this time (0~64800 seconds).
This also sets how long a
Transferred call waits at an
extension forwarded to Voice Mail
before routing to the called
extension mailbox.
Set the Transfer Recall Time
(0~64800 seconds). An
unanswered transferred call
recalls to the extension that
initially transferred it after this time.
This time also sets how long a
transferred call camps-on to a
busy extension.
For Single Line Telephones (SLTs)
without message waiting lamps,
this is the time between
intermittent ringing. If this value is
set to 0, the system rings once.
.
A release transfer to a busy
Department Group only
follows this time if the
Department Group is set to 0
= No Queue in Program
16-01-10, if set to 1, 2 or 3 it
follows the time in Program
24-02-04.
Issue 5.0
Assigned Data
0 = Hold Tone
1 = Ring Back Tone
(default = 0)
0~64800 (seconds)
(default = 10 seconds)
0~64800 (seconds)
(default = 30 seconds)
0~64800 (seconds)
(default = 30 seconds)
1 - 1009