NEC UNIVERGE SV8100 Features & Specifications Manual page 1040

Issue 5.0
Central Office Calls, Placing
Programmable Function Keys
Guide to Feature Programming
Program
Number
11-12-04
11-12-05
11-16-05
15-07-01
20-01-08
20-01-09
20-06-01
20-11-07
1 - 1030
Program Name
Service Code Setup (for Service
Access) – Set Camp-On
Service Code Setup (for Service
Access) – Cancel Camp-On
Single Digit Service Code Setup
– Camp-On
Programmable Function Keys
System Options – Trunk
Queuing Callback Time
System Options – Callback/
Trunk Queuing Cancel Time
Class of Service for Extensions
Class of Service Options (Hold/
Transfer Service) – Transfer
Without Holding
Description/Comments
Customize the Service Code,
which is to be used for setting
Camp-On.
Customize the Service Code,
which is to be used for cancelling
Camp-On.
Customize the 1-digit Service
Code used for setting Camp-On.
Assign a function key for Trunk
Queuing and Trunk Camp-On
(code 35).
Set the Trunk Queuing Callback
Time. Trunk Queuing Callback
rings an extension for this interval.
Set the Callback/Trunk Queuing
Cancel Time. The system cancels
an extension Callback or Trunk
Queuing request after this interval.
Assign a Class of Service (1~15)
to an extension.
Turns Off or On an extension
ability to use Transfer Without
Holding.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 850)
MLT, SLT
(default = 870)
(default not assigned)
Trunk Groups: 1~100
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
0~64800 (seconds)
(default = 15 seconds)
0~64800 (seconds)
(default = 64800
seconds)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
Trunk Queuing/Camp-On