NEC UNIVERGE SV8100 Features & Specifications Manual page 1021

UNIVERGE SV8100
Operation
Transferring Trunk Calls
To Transfer a trunk call to a co-worker's extension:
1. At the multiline terminal, press Transfer.
- OR -
At a single line telephone, hookflash.
You hear Transfer dial tone.
.
2. Dial the co-worker's extension number.
If the extension is busy or does not answer, you can dial another extension number or press the line key to return
.
to the call. In addition, you may be able to hang up and have the call Camp-On.
SLT users can retrieve the call by pressing hookflash. If a call has been transferred and the SLT user has hung up
.
the handset, the call can be retrieved by dialing 715 and the extension number to which it had been transferred.
3. Announce the call and press Transfer (Program 15-07 or SC 851: 06) or hang up.
If you do not have Automatic On-Hook Transfer, you must press Conf (Program 15-02-24=1) or your Transfer
.
Programmable Function Key to Transfer the call.
If your co-worker does not want the call, press the flashing line key to return to the call.
.
Single line telephone users can retrieve the call by pressing hookflash. If a call has been transferred and the SLT
.
user has hung up the handset, the call be can retrieved by dialing 715 and the extension number to which it had
been transferred.
If you do not want to screen the call, hang up without making an announcement.
.
To answer a call transferred to your extension:
1. Lift the handset or press Speaker when a co-worker announces the call.
Transferring without Holding
To Transfer without holding (multiline terminal only):
1. Lift the handset.
2. Press busy line or press Speaker.
3. When original caller hangs up, you are connected.
Transfer
Issue 5.0
1 - 1011