2. Remove the Bottle Drive Unit (C Bk) [1].
• 1 Connector [2]
• 4 Screws [3]
• 2 Bosses [4]
[3]
[4]
[3]
NOTE:
How to install the Bottle Drive Unit (C Bk)
Be sure to align the hole [A] of the gear with the protrusion [B] of the shaft to install the unit.
Removing the Toner Bottle Mount (Y/M/C/Bk)
■ Preparation (for the Toner Bottle Mount (Y/M/C))
1.
"Removing the Rear Cover 1" on page 140
2.
"Removing the Left Upper Cover" on page 144
3.
"Removing the Fax Speaker Unit" on page 214
4.
"Removing the Fax Unit" on page 214
1x
[2]
4x
[3]
[A]
[B]
[3]
[4]
247
4. Parts Replacement and Cleaning
[1]