Rear Brake Pad Inspection; Rear Brake Pad Replacement - Suzuki Intruder VZ1500 Service Manual

4C-2 Rear Brakes:

Rear Brake Pad Inspection

The extent of brake pads wear can be checked by
observing the grooved limit line "A" on the pads. When
the wear exceeds the grooved limit line, replace the
pads with new ones. Refer to "Rear Brake Pad
Replacement (Page 4C-2)".
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.

Rear Brake Pad Replacement

1) Remove the caliper mounting bolts (1).
CAUTION
!
Do not operate the brake pedal while
dismounting the pads.
2) Remove the pads mounting pin (2) by removing the
B940H24306002
3) Remove the brake pads (4).
"A"
I940H1430001-05
B940H24306003
4) Clean up the caliper, especially around the caliper
5) Aseemble the new brake pads (4) and shim (5).
1
I940H1430002-01
clip (3).
3
4
piston.
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
5
2
I940H1430003-01
I940H1430004-02
4
I940H1430005-02