Suzuki Intruder VZ1500 Service Manual page 228

1D-39 Engine Mechanical:
• The front cam chain tension adjuster are identified by
the embossed letters (F-UP).
• Retract the push rod by pushing the stopper (8).
• Install a new gasket (9).
CAUTION
!
Use a new gasket to prevent oil leakage.
9
• Install the front cam chain tension adjuster (10) and
tighten its mounting bolts.
Tightening torque
Cam chain tension adjuster bolt (c): 10 N·m (1.0
kgf-m, 7.0 lbf-ft)
• Install the spring (11).
• Install the gasket (12) and cam chain tension adjuster
cap bolt (13).
NOTE
Click sound is heard when the cam chain
tension adjuster cap bolt is installed.
10
(c)
8
F-UP
I940H1140107-02
I940H1140108-02
11
13
12
I940H1140291-03
• Tighten the cam chain tension adjuster cap bolt (13)
to the specified torque.
Tightening torque
Cam chain tension adjuster cap bolt (d): 23 N·m (
2.3 kgf-m, 16.5 lbf-ft)
CAUTION
!
After installing the cam chain tension
adjuster, check to be sure that the adjuster
works properly by checking the slack of cam
chain.
• After installing the camshaft journal holder, rotate the
crankshaft (some turns), and recheck the positions of
the camshafts.
Cylinder Head Cover
• Pour engine oil in each oil pocket in the cylinder
heads.
• Install a new gaskets to the cylinder head covers.
CAUTION
!
Use new gaskets to prevent oil leakage.
13
(d)
I940H1140109-02
I940H1140118-01