Engine Bottom Side Assembly - Suzuki Intruder VZ1500 Service Manual

Engine Bottom Side Assembly

Assembly the engine bottom side in the reverse of
disassembly. Pay attention to the following points:
NOTE
Apply engine oil to each running and sliding
part before reassembling.
Oil Gallery Plug
CAUTION
!
Use each new gasket.
• Apply thread lock to the oil gallery plug and tighten it
to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
• Tighten each plugs to the specified torque.
Tightening torque
Oil gallery plug (M16) (a): 35 N·m (3.5 kgf-m, 25.5
lbf-ft)
Oil gallery plug (M14) (b): 23 N·m (2.3 kgf-m, 16.5
lbf-ft)
Oil gallery plug (M8) (c): 18 N·m (1.8 kgf-m, 13.0
lbf-ft)
(a)
(c)
(a)
B940H21406033
Oil Jet
• Apply engine oil to the new O-ring (1).
• Apply thread lock to the oil gallery plug (2) and tighten
(a)
(b)
I940H1140296-01
(c)
I940H1140297-01
Engine Mechanical:
(c)
CAUTION
!
Use the new O-rings to prevent oil pressure
leak.
1
it to the specified torque.
CAUTION
!
Use the new gasket.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Oil gallery plug (Transmission oil jet) (M10) (a):
18 N·m (1.8 kgf-m, 13.0 lbf-ft)
2
(a)
1D-64
I940H1140298-01
1
I940H1140214-02
I940H1140299-01