Gearshift Shaft / Gearshift Cam Plate Components; Gearshift Shaft / Gearshift Cam Plate Removal And Installation - Suzuki Intruder VZ1500 Service Manual

Hide thumbs Also See for Intruder VZ1500:
Table of Contents

Advertisement

Gearshift Shaft / Gearshift Cam Plate
Components
(a)
3
2
(b)
1
1. Gearshift shaft
2. Gearshift cam drive plate
3. Gearshift cam plate
4. Gearshift cam stopper
: 10 N⋅m (1.0 kgf-m, 7.0 lbf-ft)
: 19 N⋅m (1.9 kgf-m, 13.5 lbf-ft)
: Apply thread lock to the thread part.
: Apply thread lock to the thread part.
: Apply grease to oil seal lip.
: Do not reuse.
Gearshift Shaft / Gearshift Cam Plate Removal
and Installation
Removal
1) Remove the exhaust pipes and muffler. Refer to
"Exhaust Pipe / Muffler Removal and Installation in
Section 1K (Page 1K-2)".
2) Remove the clutch component parts (1). Refer to
"Clutch Removal in Section 5C (Page 5C-6)".
B940H25206012
(a)
4
I940H1520073-02
B940H25206013
1
I940H1520048-01
Manual Transmission:
3) Remove the snap ring (2) and washer (3).
2
4) Remove the gearshift shaft assembly (4).
5) Remove the following parts from the gearshift shaft
(4).
• Washer (5)
• Snap ring (6)
• Gearshift return spring (7)
• Gearshift cam drive plate (8)
• Plate return spring (9)
• Washer (10)
• Snap ring (11)
Special tool
: 09900–06107 (Snap ring pliers)
10
11
7
5B-13
3
I940H1520050-01
4
I940H1520051-01
9
8
4
5
6
I940H1520052-01

Advertisement

Table of Contents
loading

Table of Contents