Suzuki Intruder VZ1500 Service Manual page 259

• Install the gearshift cam shaft assembly (8).
NOTE
Pinch the gearshift arm stopper (1) with
return spring ends "D".
8
Rear Cam Chain / Rear Cam Chain Drive Sprocket /
Cam Chain Tensioner
• Install the rear cam chain drive sprocket (1).
NOTE
When installing the cam chain drive sprocket,
align the wide spline tooth "A" and "B".
"A"
1
• Install the rear cam chain (2).
• Install the cam chain tensioner (3).
"D"
1
"D"
I940H1140300-02
"B"
I940H1140241-02
• Apply thread lock to the bolts and tighten its to the
specified torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
Tightening torque
Cam chain guide bolt (a): 23 N·m (2.3 kgf-m, 16.5
lbf-ft)
Rear cam chain tensioner bolt (b): 23 N·m (2.3
kgf-m, 16.5 lbf-ft)
3
(b)
Primary Drive Gear
• Install the primary drive gear assembly (1). Refer to
"Primary Drive Gear Removal and Installation in
Section 5C (Page 5C-13)".
CAUTION
!
The primary drive gear bolt (2) has left-hand
threads.
Engine Mechanical: 1D-70
2
(a)
I940H1140242-01
1
2
I940H1140243-03