Fuel Pump Assembly / Fuel Level Gauge Removal And Installation - Suzuki Intruder VZ1500 Service Manual

Fuel Pump Assembly / Fuel Level Gauge
Removal and Installation
Removal
WARNING
!
• Spilled gasoline should be wiped off
immediately.
• Keep away from fire or spark.
• Work in a well-ventilated area.
1) Remove the fuel tank. Refer to "Fuel Tank Removal
and Installation (Page 1G-9)".
2) Remove fuel pump mounting bolts diagonally.
3) Remove the fuel pump assembly (1) and disconnect
the fuel level gauge lead wire coupler (2).
2
4) Remove the O-ring (3).
3
5) Remove the fuel level gauge (4) while pushing the
pawl end "A".
B940H21706012
CAUTION
!
Do not pull the lead wire when removing the
fuel gauge.
Installation
Install the fuel pump assembly in the reverse order of
removal. Pay attention to the following points:
• Install the fuel level gauge (1) into the fuel tank.
NOTE
Push the lock position "A" fully until the
clicking sound heard.
I940H1170041-01
1
I940H1170015-02
I940H1170016-03
Fuel System:
4
"A"
1
"A"
1G-12
I940H1170017-03
I940H1170018-02