Table of Contents
Advertisement
1G-7 Fuel System:
3) First, check for insulation with the tester between
terminals "A" and "B". Next, check for continuity
between "A" and "B" with 12 V voltage applied,
positive (+) to terminal "C" and negative (–) to
terminal "D". If continuity does not exist, replace the
relay with a new one.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity test (
"A"
"B"
)
"C"
"D"
I718H1170013-01
Fuel Hose Inspection
Refer to "Fuel Line Inspection in Section 0B (Page 0B-
7)".
Fuel Level Gauge Inspection
Refer to "Fuel Level Gauge Inspection in Section 9C
(Page 9C-7)".
Fuel Level Indicator Inspection
Refer to "Fuel Level Indicator Inspection in Section 9C
(Page 9C-6)".
Fuel Level Indicator Switch (Thermistor)
Inspection
Refer to "Fuel Level Indicator Switch (Thermistor)
Inspection in Section 9C (Page 9C-6)".
B940H21706005
B940H21706006
B940H21706007
B940H21706008
Advertisement
Chapters
Table of Contents
