Final Gear Parts Inspection; Universal Joint Removal And Installation - Suzuki Intruder VZ1500 Service Manual

Final Gear Parts Inspection

Drive / Driven Bevel Gear
Inspect the drive and/or driven bevel gear wear or
damage. If any defects are found, replace the drive and/
or driven bevel gear with a new one.
Bearing
Inspect bearings, left and right for abnormal noise and
smooth rotation. Replace the bearing, if there is anything
unusual. Refer to "Final Gear Disassembly and
Assembly (Page 3A-14)".
Spring
Inspect the spring damage or fatigue. If any defects are
found, replace the spring with a new one.
Drive Chain / Drive Train / Drive Shaft:
Oil Seal
B940H23106011 Inspect the oil seal for wear and damage. If any defects
are found, replace the oil seal with a new one.
I940H1310007-01

Universal Joint Removal and Installation

Removal
1) Remove the swingarm. Refer to "Swingarm
Assembly Removal and Installation in Section 2C
(Page 2C-3)".
2) Remove the universal joint (1) and boot (2).
I822H1310086-01
I822H1310087-01
2
3A-21
I822H1310110-01
I822H1310090-02
B940H23106012
1
I940H1310008-01