5) Click the "Reset" button (2) to clear the ISC leaned
valve.
Yes
NOTE
The leaned value of the ISC valve is set at
Preset position.
2
No
I718H1130023-02
I718H1130019-01
Engine Electrical Devices:
6) Close the SDS tool and turn the ignition switch OFF.
NOTE
The ISC valve opening initialization is
automatically started after the ignition switch
is turned OFF position.
HO2 Sensor Inspection
Refer to "DTC "C44" (P0130/P0135): HO2 Sensor
(HO2S) Circuit Malfunction (For E-02, 19, 24, 33) in
Section 1A (Page 1A-80)".
HO2 Sensor Removal and Installation
Refer to "Heated Oxygen Sensor (HO2S) Removal and
Installation in Section 1B (Page 1B-8)".
GP Switch Inspection
Refer to "Side-stand / Ignition Interlock System Parts
Inspection in Section 1I (Page 1I-8)".
GP Switch Removal and Installation
Refer to "Gear Position (GP) Switch Removal and
Installation in Section 5B (Page 5B-10)".
1C-9
B940H21306022
B940H21306023
B940H21306024
B940H21306025