Specifications; Tightening Torque Specifications; Special Tools And Equipment; Recommended Service Material - Suzuki Intruder VZ1500 Service Manual

9D-7 Exterior Parts:
Secondary Gear Case Cover / Left Frame Lower
Cover
Removal
1) Remove the left frame side cover. Refer to "Exterior
Parts Removal and Installation (Page 9D-5)".
2) Remove the secondary gear case cover (1).
3) Remove the left frame lower cover (2).
1
Installation
Install the covers in the reverse order of removal.

Tightening Torque Specifications

NOTE
The specified tightening torque is described in the following.
"Rear Fender Construction (Page 9D-4)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-8)".

Recommended Service Material

Material
Thread lock cement
NOTE
Required service material is also described in the following.
"Rear Fender Construction (Page 9D-4)"
2
I940H1940011-01

Specifications

Special Tools and Equipment

SUZUKI recommended product or Specification
THREAD LOCK CEMENT SUPER
1322 or equivalent
Right Frame Lower Cover
Removal
1) Remove the exhaust pipe and muffler. Refer to
"Exhaust Pipe / Muffler Removal and Installation in
Section 1K (Page 1K-2)".
2) Remove the right frame lower cover (1).
1
Installation
Install the right frame lower cover in the reverse order of
removal. Pay attention to the following point:
• Apply thread lock to the right frame lower cover
mounting screws.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
P/No.: 99000–32110
I940H1940012-01
B940H29407001
B940H29408001
Note
(Page 9D-7)