Rear Brake Pad Inspection; Rear Brake Pad Replacement - Suzuki GSF1250 Service Manual

4C-2 Rear Brakes:

Rear Brake Pad Inspection

The extent of brake pads wear can be checked by
observing the grooved limit line "A" on the pads. When
the wear exceeds the grooved limit line, replace the
pads with new ones. Refer to "Rear Brake Pad
Replacement (Page 4C-2)".
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.

Rear Brake Pad Replacement

1) Remove the plug (1).
1
2) Loosen the pad mounting pin (2).
B718H14306002
3) Remove the caliper mounting bolt (3).
CAUTION
!
Do not operate the brake pedal while
dismounting the pads.
"A"
4) Remove the pad mounting pin (2) and brake pads
with the rear caliper pivoted up.
NOTE
When removing the pads, push the piston all
I718H1430001-02
the way into brake caliper.
B718H14306003
I718H1430016-01
2
3
2
I718H1430018-02
I718H1430017-02