Suzuki Intruder VZ1500 Service Manual page 460

4A-14 Brake Control System and Diagnosis:
3) Remove the union bolt (2).
4) Disconnect the rear reservoir tank hose (3).
3
5) Remove the footrest bracket bolts (4).
6) Loosen the lock-nut (5) and remove the push rod (6).
7) Remove the rear master cylinder (7) by removing the
mounting bolts (8).
7
6
5
2
I940H1410058-02
4
I940H1410059-02
I940H1410061-03
8) Remove the reservoir (9) along with reservoir hose
(10).
10
Installation
Install the rear brake master cylinder in the reverse order
of removal. Pay attention to the following points:
• Install the reservoir hose (1) to the clamp (2).
1
• Install the master cylinder (3) and tighten the master
cylinder mounting bolts (4) to the specified torque.
Tightening torque
Rear brake master cylinder mounting bolt (a): 10
N·m (1.0 kgf-m, 7.0 lbf-ft)
3
I940H1410062-03
2
I940H1410064-02
4
(a)
I940H1410066-03