Suzuki Intruder VZ1500 Service Manual page 545

" b "
5
"C"
1. Clamp
2. Clamp
: Cut the tip of clamp after clamping.
3. Reservoir inlet hose
4. Conduction hose
5. Clamp
6. Clamp
: Bind the generator lead wire and side stand switch lead wire with the clamp.
7. Clamp
: Bind the GP switch and clutch release assembly with the clamp.
"A": Pass the wiring harness over the high tension cord.
1
2
" a "
" a "
3
4
"A"
1
"B"
5
1
6
1
" a "
"a"
1
1
7
"D"
"B": Pass the wiring harness under the high tension cord.
"C": Pass the wiring harness backward of the clutch cable.
"D": Pass the wiring harness between the clutch release
assembly and generator cover.
"E": Pass the wiring harness in front of the hose.
"F": Pass the starter motor lead wire between the hose and
battery holder.
"a": 0 – 20 mm (0 – 0.8 in)
"b": 0 – 10 mm (0 – 0.4 in)
Wiring Systems: 9A-6
"E"
"F"
I940H1910909-04