Suzuki Intruder VZ1500 Service Manual page 250

1D-61 Engine Mechanical:
Crankcase
1) Remove the crankcase bolts.
NOTE
Loosen the crankcase bolts diagonally with
the smaller sizes first.
2) Make sure that all of the bolts are removed. Then,
tap the sides of the right crankcase using a plastic
hammer to separate the left and right crankcase
halves and then lift the right crankcase off of the left
crankcase.
NOTE
The crankshaft and transmission
components should remain in the left
crankcase half.
3) Remove the O-rings (1) and dowel pins (2).
I940H1140197-01
Transmission / Gearshift Cam
Remove the gearshift cam (1), driveshaft assembly (2)
and countershaft assembly (3).
I940H1140198-01
Crankshaft
1) Remove the crankshaft (1).
I940H1140199-01
1
2
2
3
1
I940H1140200-01
I940H1140201-01
I940H1140202-02
1
I940H1140203-01