Suzuki Intruder VZ1500 Service Manual page 430

3A-16 Drive Chain / Drive Train / Drive Shaft:
15) Remove the shim (12) and final driven bevel gear
(13).
16) Remove the shims (14).
17) Remove the final driven bevel gear bearing (15) from
the bevel gear with two bolts or suitable bars.
NOTE
If no abnormal noise, the bearing removal is
not necessary.
15
13
12
I822H1310059-01
14
I822H1310060-01
I822H1310061-01
18) Remove the oil seal (16) with the special tool.
Special tool
(E): 09913–50121 (Oil seal remover)
(E)
19) Remove the final driven gear bearing (16) and oil
seal (17) with the special tools.
Special tool
(F): 09941–64511 (Bearing remover)
(G): 09930–30104 (Rotor remover sliding
shaft)
16
(F)
(G)
20) Remove the final drive gear bearing (18) with the
special tools.
Special tool
(H): 09923–74511 (Bearing remover)
(G): 09930–30104 (Rotor remover sliding
shaft)
16
I822H1310062-01
17
(F)
(G)
I822H1310063-01
18
(H)
(G)
I940H1310050-01